Bravetti PLATINUM PRO EP65 - Manual (Page 8)

4. Using the Deep Fryer
Warning: Never plug in the Deep Fryer before filling with oil to specified level. Always make
sure control panel (#5) is securely in place in the body (#1) and the heating element
(#13) is inside the oil in the container before plugging in.
Important: Ensure the control panel (#5) is fitted correctly to the main unit otherwise the unit will
not function. This is not a defect. This product is fitted with a safety switch to
prevent the unit from turning on accidentally.
Pre-Heating
Warning: Never plug in the Deep Fryer before filling with oil. (See instructions in section 2.)
Always unplug the appliance when not in use.
• Make sure the oil level in the oil container (#3) is between the “minimum” and “maximum”
lines inside the oil container (#3).
• The frying basket (#14) should not be immersed in the oil during the pre-heating.
• Replace the lid cover (# 10).
• Plug the appliance into a 120-volt outlet.
• Turn the on/off switch (#6) to the “on” position.
• Select the required temperature on the temperature setting dial (#8). Fig. 3
Fig. 3
• Pre heating the oil will take up to 15 minutes depending on the temperature selected.
•The temperature indicator light (# 7) will come on when the temperature is set and the deep
fryer is “on” showing that the heating element is in operation. This light goes off when the set
temperature is reached. Fig. 4 The temperature light may go on and off several times during
frying. This indicates that the temperature is thermostatically maintained.
Warning: In order to avoid injury or burns, never touch any metal parts on the deep fryer
because they may be hot.
On/Off
Switch
Temperature
Indicator Light
Fig. 4
6