Liebherr CNPesf 3913 Comfort NoFrost - Manual (Page 10)

Fig. 10
u Lift the shelf slightly and pull forward a little.
u Adjust the height of the shelf. To do so, push the cut-outs
along the supports.
u In order to remove the shelf fully, place it at a slant and pull
out towards the front.
u Insert shelf with the raised edge pointing upwards at the
back.
w The food does not freeze onto the rear wall.
Dismantling shelves
u
The shelves can be disman-
tled for cleaning.
5.3.5 Using the sectioned shelf*
Fig. 11
u The glass shelf with stop face (2) has to be at the back.
5.3.6 Door racks
Moving the storage rack
*
u Remove storage rack according to
illustration.
*
The boxes can be removed
and placed on the table as a
single unit.*
*
Three small boxes are available through the customer service
as optional equipment instead of one wide and one small box.*
Either one or both the boxes can be used. If particularly tall
bottles are to be stored, hang only a single box above the bottle
rack.*
u Re-positioning the boxes:
Lift them for removal and
re-position them as
required.*
*
Dismantling door racks
Fig. 12 *
*
*
u The door racks can be dismantled for cleaning.
5.3.7 Removing the bottle holder*
u Always take hold of the bottle holder
on the plastic part.
5.4 Freezer compartment
You can store frozen food, make ice cubes and freeze fresh
food in the freezer compartment.
Control
10 * Depending on model and options