Blaupunkt BRISTOL CD36 - Manual (Page 8)

31
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Note:
● If the vehicle ignition was switched
off before you inserted the CD,
you will first have to switch on the
device by pressing button
1 in
order to start playing the CD.
Switching on/off using the
removable control panel
➮
Remove the control panel.
The unit switches off.
➮
Attach the control panel again.
The unit switches on. The settings (ra-
dio, CD, CD changer or AUX) that were
set before the unit was switched off will
be reactivated.
Adjusting the volume
You can adjust the volume in steps
from 0 (off) to 66 (maximum).
To increase the volume,
➮
press the button
4.
To decrease the volume,
➮
press the button
4.
Setting the power-on volume
Note:
● The device is equipped with a
timeout function. If, for instance,
you press the MENU button
7
and select a menu item, the de-
vice will switch back approx. 8
seconds after the last button was
pressed. Any changes to the set-
tings that you have made will be
saved.
You can set the power-on volume.
➮
Press the MENU button 7.
➮
Press the or button
8 re-
peatedly until “ON VOLUME” ap-
pears in the display.
➮
Adjust the power-on volume using
the
buttons
8.
To help you adjust the setting more
easily, the device will increase or de-
crease the volume as you make your
changes.
If you change the setting to “LAST
VOL”, the volume level that was set the
last time you switched off the device
will be activated again.
ADJUSTING THE VOLUME SWITCHING ON/OFF
02Bristol_VancCD36 gb 07.02.2006, 15:42 Uhr 31