Philips SHAVER Series 3000 Rasoir électrique - Manual (Page 3)

Charge the appliance for at least 8 hours, but not
more than 24 hours. Do not leave the appliance
connected to the mains continuously.
To prevent the battery from going flat during shaving,
you can also charge the shaver in between shaves,
even if the battery is not completely empty yet. This
will not damage the battery.
You can also shave without charging by connecting
the shaver to the mains.
Charge indications
charging
When you start charging the empty shaver, the
charging light goes on.
charging the appliance
Charge the appliance when:
the appliance is new or has not been used for a
long time
motor stops or starts running slower
Do not recharge the shaver in a closed pouch.
1 Put the appliance plug in the shaver.
2 Put the mains plug in the wall socket.
3 Remove the mains plug from the wall socket
and pull the appliance plug out of the shaver
when the battery has been fully charged.
Cordless shaving time
A fully charged shaver has a cordless shaving time of
up to 10 days.
,
-
-
CHARGE CHARGE
EnglisH 5