BT Zenith Flip 6861 - Manual (Page 9)

2. Insert handset battery. Push in the button on the battery
compartment cover and slide the cover off . Slot the
Li-ion battery supplied into the handset and replace
the cover .
3. Charge the handset for at least 24 hours by placing it on
the base. The red charging light comes on. The exterior
screen shows the clock. The handset is pre-registered to the
base as Zenith 1. The screen shows the standby display.
The red charging light stays on while the handset is
being charged. Once fully charged the light will go off.
4
3
2 1
9 Getting started
Battery low warning
The handset battery symbol is
empty and flashing and you will
hear a warning beep every 30
seconds. Start recharging your
handset right away or the handset
will shut down.
When charging the battery symbol
is animated.
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047
1
2
3
4