beautypg.com

Electromagnetic fields (emf), Before first use, Using the appliance – Philips 2 fentes User Manual

Page 7: Toasting bread, Toasting frozen bread

background image

Only connect the appliance to an earthed wall socket.

Always unplug the appliance after use.

The toaster is intended for household use only and may only be used indoors. It is not intended

for commercial or industrial use.

If a slice of bread gets stuck inside the toaster, unplug the appliance and let it cool down before

you try to remove the bread. Do not use a knife or a sharp tool, as these may cause damage to

the heating elements.

The warming rack is only intended for warming up rolls or croissants. Do not put any other

ingredients on the warming rack, as this may lead to a hazardous situation.
Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientific evidence available today.

Before first use

Remove any stickers and wipe the body of the toaster with a damp cloth.

Before you use the appliance for the first time, we advise you to let the appliance complete a few

toasting cycles without slices of bread on the highest browning setting in a properly ventilated room.

This burns off any dust that may have accumulated on the heating elements and prevents unpleasant

smells during toasting.

using the appliance

1

Put the appliance on a stable and flat surface, away from curtains and other combustible

materials. Put the plug in the wall socket.

To adjust the length of the cord, wind part of it round the brackets in the base of the

appliance.
toasting bread

Never let the toaster operate unattended.

1

Put one or two slices of bread in the toaster (Fig. 2).

Select the desired browning setting. (Fig. 3)

Select a low setting (1-2) for lightly toasted bread and a high setting (5-7) for darkly toasted bread.

Push down the toasting lever to switch on the appliance. (Fig. 4)

The toasting lever only stays down when the appliance is connected to the mains.

The stop button lights up.

The metal parts of the toaster become hot during toasting. Do not touch them.

When the toast is ready, it pops up and the toaster switches off.

The toaster switches off automatically. You can stop the toasting process and pop up the

bread at any time by pressing the STOP button on top of the toaster (Fig. 5).

To remove smaller items, move the toasting lever upwards a little further.

If bread gets stuck inside the toaster, remove the plug from the wall socket and let the appliance

cool down completely. Then carefully remove the bread from the toaster. Do not use a knife or

another sharp metal tool to do this and do not touch the metal internal parts of the toaster.
toasting frozen bread

Note: Toasting frozen bread takes longer than toasting defrosted bread.

1

Put one or two slices of frozen bread in the toaster.

-

-

-

-

-

,

-

-

-

EnglisH

This manual is related to the following products: