Black & Decker EK600 - Manual (Page 3)

NOTE: The rubberized grip is free of
natural rubber and latex. It is safe for
use by individuals allergic or sensitive
to these materials.
IMPORTANT: When the
TriggerGuard™ “Lock” is in position,
the “On” Switch cannot be pressed
inward even when the Knife is
plugged in (A).
1. Before first use,
wash the blades in hot,
soapy water or in the dishwasher. Rinse and dry
thoroughly. Slip the Rivet at the tip of one blade
into the Keyhole Slot on the other (B).
2. When inserting or removing Blades, always be
sure the TriggerGuard™ Lock is slid over the “On”
Switch and the cord is unplugged.
3. With the cutting (serrated) edge facing AWAY from
your hand, grab the Blades by the Finger Grips and insert
the two ends of the Blades into the slots of the Handle (C). The Blades will “click”
into place. Plug the cord into a standard outlet. Position the food to be sliced on
a cutting board.
Volts, and have Underwriters Laboratories listing. Handle cord carefully for
longer life; avoid jerking or straining it at outlet and appliance connections.
BEFORE USING
CAUTION: The TriggerGuard™ Lock must be slid over the “On” Switch before
inserting or removing Blades.
How To Use
9” (229 mm)
Slicing/Carving Blade
A
B
3
Blade Release Button
Handle
6 3/4” (171 mm) Utility Blade
(EK600 only)
TriggerGuard™ Lock
“On” Switch
Finger Grips