Operation, System status lights, Using the usb key – Bose SoundLink AM319182 User Manual
Page 9: Peration
5
TAB 5, 13
TAB 4, 12
TAB 6, 14
TAB 8, 16
TAB 7, 15
English
TAB 3, 11
TAB 2, 10
O
PERATION
System status lights
The status lights on the SoundLink™ speaker front panel
indicate source selection and battery condition.
Using the USB key
The USB key will automatically connect your computer
with the SoundLink speaker whenever you insert it into a
USB port.
AUX
AUDIO IN source (page 7)
Off: ..... AUX source not selected
On: ..... AUX source is selected
Wireless source
Off: ................... No wireless connection
Fast flashing: ... Wireless source is
connecting
On: ................... Wireless source is
connected
Brief flash: ........ Wireless source is
(every 3 sec)
selected, but discon-
nected at the computer
Battery
• Indicates battery level during
portable operation. See “Operating
on battery power” on page 8.
• Indicates battery charging status.
See “Charging the battery” on
page 9.
Note:
Each button pressed on
the remote causes the light for
the selected source to blink.
Disconnect-reconnect button
Press to disconnect or reconnect the
SoundLink speaker
Power light
Off: .......................USB key is not powered
Slow flashing: ......Powered and available for connecting
to the SoundLink speaker
Fast flashing: ........Establishing a connection
On:........................Connected to the SoundLink speaker
PharosOG.book Page 5 Thursday, May 21, 2009 10:09 AM