Bryston B60RDA - Manual (Page 5)

B60 INTEGRATED AMPLIFIERS
GENERAL:
DIMENSIONS:
Standard version: 17” x 1.75” x 11” (43.18 x 4.44 x 28cm)
Rack mount version: 19” x 1.75” x 11” (48.26 x 4.44 x 28cm)
WEIGHT: 17 lbs (7.5 kg)
PREAMPLIFIER Section:
FREQUENCY RESPONSE: 20Hz~20kHz +/- .05dB
MAXIMUM OUTPUT: 15 volts
IMD/THD: <0.005% at 3 volts out
SENSITIVITY: 500mV (High level inputs)
NOISE: -100dB (Ref. 500mVin), 20~20K Hz
POWER AMPLIFIER Section:
OUTPUT POWER: 60 watts/channel into 8 ohms
100 watts/channel into 4 ohms
THD+N: <0.02% 20Hz~20KHz @ 60 watts
NOISE: 106dB gwlow full output
SLEW RATE: >60v/uSec
DAMPING FACTOR: >500 at 20Hz (8 ohms)
POWER BANDWIDTH: 0.5Hz to over 100KHz
SENSITIVITY: .775v
INPUT IMPEDANCE: 50K ohms
ADDITIONAL SPECIFICATIONS for B60DA/B60RDA DIGITAL INPUTS:
INPUT SAMPLE RATE: 16kHz to 108kHz.
WORD LENGTH: 16, 18, 20, 24 Bit
DATA FORMAT: SPDIF standard
THD+N: < 0.002%, 20Hz~20kHz
ADDITIONAL SPECIFICATIONS for B60P/B60RP PHONO INPUTS:
THD+N: <0.005%, IM or THD, any frequency or
combination of frequencies from 20-20kHz,
at rated output or below.
NOISE: Phono: -80dBA referred to an input of 5 mV
RIAA ACCURACY: Within less than +/- 0.05dB from 20~20kHz
SENSITIVITY: 5mV
SPECIFICATIONS
VARIOUS SPEAKER WIRE TERMINATIONS AMPLIFIER OUTPUT BINDING POSTS
3