Buffalo Technology LPV2-USB-TX1 - Manual (Page 19)

19
Macintosh Setup
Print Server Configuration
Open the ‘System Preferences’ from the Apple menu and select
‘Network’. Set ‘Show’ to ‘Buit-in Ethernet’. Record the current
settings; they will be needed later. Set ‘Configure’ to ‘Manually’. Enter
1.1.1.2 into the ‘IP Address’ field. Enter 255.255.255.0 into the ‘Subnet
Mask’ field. Press the ‘Apply Now’ button when finished.
Open a Web Browser (Version 4.5 or later) and enter 1.1.1.1 into the
‘Address’ field. Press the Enter or Return key to continue.
The ‘Server Status’ page of the USB Print Server will open. Press the
‘Configure Server’ link to continue setting the Print Server up.