Philips AVENT Écoute-bébé DECT - Manual (Page 17)

17
6
When the timer has reached 00:00, the feed
timer alert goes off, the timer symbol starts
flashing on the display and the message
‘TIMER END’ scrolls across the display.
7
Press any key to stop the alert. If you do not
stop the alert, it stops automatically after
2 minutes.
7.6.2 Repeat the feed timer
1
After step 5 in ‘Setting and using the feed
timer’, select ‘Repeat’ with the + and - buttons.
Press OK to confirm.
2
Choose ‘Repeat ON’ or ‘Repeat OFF’ and
press OK to confirm.
3
Select ‘xx:xx Start’ with the + and - buttons
and press OK to activate the feed timer
repeat function.
4
When you press any key to stop the feed
timer alert or if the alert stops automatically
after 2 minutes, the feed timer starts counting
down again.
7.6.3 Stopping the timer
1
Press the menu button and select ‘Feed Timer’.
2
Use the + and - buttons to select ‘Stop’ and
press OK to confirm.
7.7 Temperature
A baby sleeps comfortably at a temperature
between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range. You
can also set a temperature alert to warn you that
the temperature is outside the set range.
• The selected lullaby repeats
continuously for 15 minutes, unless you
use the + and - buttons to select ‘stop’
in the menu.
• If you select ‘Play all’, all pre-stored
lullabies are played for 15 minutes. The
display shows the number of the lullaby
that is playing.
7.5.2 Stopping lullaby playing
1
Press the MENU button and select ‘lullaby’.
2
Use the + and - buttons to select ‘Stop’ and
press OK to confirm.
7.6 Feed timer
You can set the feed timer to alert you that it is
time to feed your baby. The timer can be set from
1 minute to 23 hours and 59 minutes.
7.6.1 Setting and using the feed timer
1
Select ‘Feed Timer’ in the menu with the +
and - buttons and press OK to confirm.
2
Select ‘Set Timer’ with the + and - buttons.
Press OK start setting the timer.
• The hour indication starts flashing on the
display.
3
Set the hour and press OK to confirm.
• The minutes indication starts flashing on the
display.
4
Set the minutes and press OK to confirm.
5
Select ‘xx:xx Start’ with the + and - buttons.
Press OK to confirm.
• The timer symbol appears on the display.
• The timer starts counting down.
ENGLISH