Blaupunkt MP74 US - Manual (Page 36)

36
Making adjustments
➮
Press and hold down the AUDIO
button
:
for longer than two sec-
onds.
➮
Press the softkey
5
assigned to
the “USER” display item.
➮
Press the softkey
5
assigned to
the display item of the equalizer
(“EQ-1”, “EQ-2” or “EQ-3”) whose
settings you want to change.
➮
Press the softkey
5
assigned to
the display item of the equalizer
band (“LOW1”, “LOW2”, “HIGH1”,
“HIGH2” or “HIGH3”) whose setting
you want to change.
The top line displays the frequency in
Hz, the level in dB and the quality factor
“Q”.
To select the frequency,
➮
repeatedly press the joystick
8
to
the left or right until the frequency
flashes.
➮
Adjust the frequency that you want
to change by pressing the joystick
8
up or down.
To adjust the level,
➮
repeatedly press the joystick
8
to
the left or right until the level dis-
played in front of “dB” flashes.
➮
Adjust the level for the frequency
by pressing the joystick
8
up or
down.
You can use the quality factor to adjust
the width of the filter. The higher you
set the value for the quality factor the
more directly the filter will be applied to
the selected frequency.
To adjust the quality factor,
➮
repeatedly press the joystick
8
to
the left or right until the quality fac-
tor displayed after “Q” flashes.
➮
Adjust the quality factor by press-
ing the joystick
8
up or down.
Note:
Proceed in the same way with all the
frequencies that you want to adjust.
➮
Press the joystick OK
8
or the
AUDIO button
:
to close the
menu.
The settings are saved.
EQUALIZER