Philips SHAVER Series 9000 Rasoir électrique rasage à sec ou sous l'eau - Manual (Page 37)

Problem Possible cause Solution
An exclamation
mark,
replacement
reminder and
the cleaning
reminder
have suddenly
appeared on the
display.
The shaving heads
are soiled or
damaged.
Replace (see chapter
‘Replacement’) or clean the
shaving heads (see chapter
‘Cleaning and maintenance’).
Water is leaking
from the
bottom of the
shaver.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
The SmartClean
system does not
work when I
press the on/off
button.
The SmartClean
system is not
connected to the
mains.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
The shaver is
not entirely
clean after I
clean it in the
SmartClean
system.
You have not placed
the shaver
in the SmartClean
system properly,
so there is no
electrical connection
between the
SmartClean system
and the shaver.
Press down the top cap
(‘click’) to ensure a proper
connection between the
shaver and the SmartClean
system.
The cleaning
cartridge needs
replacement.
Replace the cleaning
cartridge (see chapter
‘Cleaning and maintenance’).
ENGLISH 37