BOXLIGHT CD-725c - Manual (Page 25)

Maintenance 21
BOXLIGHT CD-725c User’s Guide
MAINTENANCE
Lamp Information
Use and Replacement of the Lamp
When the Lamp Indicator lights up red or a message appears suggesting the time of lamp
replacement, please install a new lamp or consult your dealer. An old lamp could cause a
malfunction in the projector and in rare instances may even explode.
Lamp LED Indicators
Caution
The LAMP indicator will light up if the lamp becomes too hot. Turn off the
power and let the projector cool for 45 minutes. If the LAMP indicator is still
red when turning the power on, please contact BOXLIGHT Technical Sup-
port at 1-800-762-5757 or +1-360-779-7901.
Lamp Life Indicators When the LED lights up red, it is warning you that lamp
usage has exceeded 1500 hours. Replace the projection
lamp with a new one immediately.
The Lamp is not
properly attached LED lights up red.
The temperature is too
high When the projector’s internal temperature is too high for
the projector to operate safely, the LED blinks orange and
the lamp turns off automatically. The LED keeps blinking
while the unit is off.
If the LED light is off, the operation and temperature of the
projector’s lamp are normal.