BlueAnt V12 LCD Bluetooth Headset - Manual (Page 5)

5
Basic Operations
IMPORTANT:
The headset needs to be ‘paired’ with your Bluetooth mobile phone fi rst, before you can
use the following functions (See Pairing to your Bluetooth mobile phone page 3).
Make a Call (Normal Dial):
Dial a contact and press send on your phone. Audio will automatically be on the V12.
Note: With some phones like Siemens S55 and Panasonic X70, audio will at fi rst be on
the phone during an outgoing call. You need to press the MFB(3) for 1 second to transfer
the audio to your headset.
Answer a Call:
During the ring tone, press the MFB(3) fi rmly to answer the call (1st beep or until ACCEPT
is displayed).
During an incoming call, Caller ID will be displayed on the LCD(4). If you turned on the
vibrate option, the headset will vibrate while ringing during an incoming call (See Turning
the Vibrate Option On or Off on page 6).
Note: With some phones paired to V12 (Headset profi le phones only), RI
n
GI
n
G is
displayed instead of the caller ID.
End a Call: Press the MFB(3) fi rmly to end the call (1st beep, or until E
n
d CALL
is displayed).
Voice Dial:
Important: Make sure the voice dialling function of your phone is activated.
Record at least one voice tag. (Kindly refer to the procedure in your phone’s manual.)
Note: Voice dialling entries must be stored in the phone’s memory, not on the SIM card!
1. Press the MFB(3) fi rmly (1st beep or until VOICE dIAL is displayed). A voice dial
tone will be heard on the headset, prompting the user to say the voice tag of a
contact to call.
2. Say the voice tag exactly as how you recorded it.
3. The voice will be played back to you, then the phone will dial the number
automatically.
Redial (For Handsfree Profi le Phones only):
Press the MFB(3) for 3 seconds (2nd beep, or until REdIAL is displayed).
Reject a Call (For Handsfree Profi le Phones only):
During the ring tone, press the MFB(3) for 3 seconds (2nd beep, or until REJECT
is displayed).