Philips Azur Fer vapeur - Manual (Page 11)

4 Set the appropriate steam setting (see the
‘Temperature and steam settings’ table above).
Note: Make sure that the steam setting you select is
suitable for the set ironing temperature.
5 Put the mains plug in an earthed wall socket.
, The amber temperature light goes on.
6 When the amber temperature light has gone
out, wait a while before you start ironing.
, The temperature light goes on from time to
time during ironing.
using the appliance
Note: The iron may give off some smoke when you use
it for the first time. This ceases after a short while.
ironing without steam
1 Set the steam control to position 0 (= no
steam).
2 Set the required ironing temperature (see
chapter ‘Preparing for use’, section ‘Selecting
the temperature and steam setting’).
EnGlish 11