Philips SENSEO® Machine à café à dosettes - Manual (Page 21)

10 Clean the water inlet on the machine with a
moist cloth.
Do not use an object with sharp edges to clean the
water inlet.
11 Rinse the parts with fresh water and put them
back into the machine.
12 Clean the water distribution disc with a moist
cloth.
Be careful when you do this; make sure that the
rubber sealing ring does not get stuck under the
edge of the water distribution disc. If it does, the
coffee machine will start leaking!
Note: Be careful not to damage the metal tab on the
water distribution disc.
Flushing the coffee machine
If you have not used the coffee machine for one
day, you have to flush the machine with fresh water
before you use the machine again.
To flush the boiler, brew two cups of hot water in
the following way:
1 Fill the water reservoir with cold water at least
up to the MIN level and put it back into the
machine.
2 Put the 1-cup pod holder q or the 2-cup pod
holder qq in the machine without pod(s).
3 Close the lid and lock the lever.
EnglisH 21