Cleaning the milk container unit, A flushing after every use with the clean button, B cleaning all parts after last use of the day – Philips SENSEO® Machine à café à dosettes User Manual
Page 3

9
10
11
1
2
3
4
2
1
3
4
5
6
7
Select the desired
coffee variety.
For black coffee only:
choose a small, medium
or large cup.
Place 1 or 2 cups under
the spout and press or
(for black coffee only)
to brew coffee.
Tip: Pre-heat your cups
with hot water to keep
the coffee hot longer.
caffè latte
latte macchiato
cappuccino
black coffee
Cleaning the milk container unit
A Flushing after every use with the CLEAN button
Lift the lever and remove
the milk container unit
from the machine.
For a reliable performance of the milk container unit and consistently good frothing results, it is very
important that you follow each of the 2 cleaning procedures below:
A
Flush the milk container unit with the CLEAN button immediately after use when you do not intend
to froth milk again straightaway.
B
Clean all parts of the milk container unit thoroughly after the last use of the day.
Rinse the milk container
under the tap and fill it
with cold water.
Reinsert the milk
container and place an
empty cup on the cup
tray.
Press the CLEAN button.
B Cleaning all parts after last use of the day
Open the blue milk
container lid cover.
Remove the milk
container lid.
Pull out the blue steam
inlet.
Pull off the milk tube.
Clean the milk container,
milk container lid and milk
tube in the dishwasher
(recommended) or in hot
water with some washing-
up liquid. Rinse the parts
with fresh water after
cleaning.
Push back the steam inlet,
connect the milk tube
firmly onto the connector
of the milk container
lid and close the milk
container lid cover.
Reattach the lid, place
the milk container unit
in the machine and
press down the lever.