Philips Brosse soufflante - Manual (Page 12)

troubleshooting
If problems arise with your hairstyler and you are unable to solve them
with the information below, please contact the nearest Philips service
centre or the Philips Customer Care Centre in you country.
Problem Cause Solution
The
appliance
does not
work at all.
Perhaps there is a
power failure or
the socket is not
live.
Check if the power supply works. If
it works, plug another appliance
into the socket to check whether
the socket is live.
Perhaps you did
not switch on the
appliance.
Make sure the appliance is plugged
in. Then select the preferred setting
to switch on the appliance.
Perhaps the
appliance
overheated and
switched itself off.
Unplug the appliance and let it cool
down for a few minutes. Before you
switch the appliance back on, make
sure the grille is not blocked by fluff,
hair, etc.
Perhaps the
appliance is not
suitable for the
voltage to which it
is connected.
Make sure that the voltage
indicated on the appliance
corresponds to the local mains
voltage.
Perhaps the mains
cord of the
appliance is
damaged.
If the mains cord is damaged, you
must have it replaced by Philips, a
service centre authorised by Philips
or similarly qualified persons in
order to avoid a hazard.
EnglisH 1