Behringer Professional 2-channel ultra low-noise DJ mixer VMX200 User Manual

Page 10

PRO MIXER VMX200

3. REAR PANEL

FUSE HOLDER/VOLTAGE SELECTOR. Before you connect the equipment to an AC outlet, please be

sure that the voltage displayed corresponds with your local AC voltage. If you should need to replace the

fuse, be sure to replace it with one of the same type and value. Some units allow you to switch between

230 V and 115 V by rotating the fuse holder.

Note: To operate the unit at 115 V, you must install a fuse with the double ampere rating.

This is the socket for the power cable. The impulse behavior of any given amplifier circuit depends

largely upon the power supplys inherent reserves. All mixers contain numerous operational amplifiers

(op-amps) for processing line-level signals. Due to the restricted performance of their power supplies,

many mixers show stress symptoms when used under extreme conditions, resulting in inferior audio

quality. Thanks to its generously proportioned power supply, this will never happen to your VMX200: The

sound will always be clear, transparent and powerful.

SERIAL NUMBER. Please take the time to fill out and return the warranty card within 14 days after the

date of purchase. This will entitle you to all the benefits of our extended warranty. Alternatively, you can