BKI Multi-Deck Warmer MDW - Manual (Page 11)

Multi-Deck Warmer Maintenance
9
Maintenance
Failure to comply with the maintenance below could result in a serious accident.
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs electrical repair. Ensure that a licensed electrician performs
electrical repair.
Scheduled Maintenance
Use the following table to help manage scheduled maintenance activities.
Frequency Performed By Part Activity
Daily User Unit Clean the entire Unit. Refer to the cleaning
procedure below.
Monthly User Shelf Power
ON/OFF Circuit
Breaker
Press push-to-test button to test overload,
short circuit and ground fault protection
capability.
Cleaning
This unit should be cleaned at the end of each day. Use the following procedure:
Failure to remove power from this unit may cause severe electrical shock. This
unit may have more than one disconnect switch.
1. Place the POWER ON/OFF circuit breaker in the OFF position.
2. Place the LIGHTS ON/OFF circuit breaker in the OFF position.
3. Allow unit to cool down.
4. Disconnect power from the unit by unplugging it from the power receptacle.
5. Remove product from the shelves.
Using abrasive cleaners may damage the unit. Use only a mild soap and water
solution.
Never steam clean or get excess water in the interior of the unit as this can
damage unit.
6. Use a mild soap and water solution to clean the unit.
7. Sponge the inside and outside with a mild soap and water solution.
8. Wipe the unit dry with a soft, clean cloth.