Badger Basket 0860T User Manual
Page 5
3.0/1108/TG
STEP 5: Unpack the
BEDDING SET (I). You
may launder the set be-
fore use if you wish,
and/or iron, press, or
steam it to remove
wrinkles. Machine wash
cold, gentle cycle only;
air dry or tumble dry
low or no heat. Iron on
lowest setting for poly/
cotton.
Locate the buttonholes
on the FABRIC LINER
and slip them over the
spools on the BASSI-
NET BODY (H).
Smooth the liner around
the sides and bottom in-
side the bassinet, and adjust it around the outside of the bassinet.
Put the SHEET onto the MATTRESS PAD (J) and place
the mattress pad into the bassinet.
Snap together the HOOD HOOP FRAME (K) as shown
in PICTURE 5. Stretch the fabric HOOD over the FRAME and
slip the elastic loops over the ends of the frame to hold the hood
in place. Snap the FRAME (K) onto the spools on the BASSI-
NET BODY (H).
The bassinet is now ready for your baby! See PICTURE 6.
Page 5 of 6
PICTURE 3B
PICTURE 4A
“Puzzle Piece” Fit
PICTURE 4B
Snap Straps
Raised Lip
towards front
PICTURE 5
PICTURE 6
NOTE: Your bassinet
bedding may vary
from shown