Braun CORDLESS MEDIUM STYLER C 21 - Manual (Page 3)

3
A Energy supply /
start switch
«0» = off,
«1» = energy supply,
«start» = starting heat up
B Ignition control window
C Tong
D Ready indicator dot
E »open« release button
for handle
F Energy level indicator
G Round styling brush
H Heat-resistant cover
with safety lock
B e f o r e u s e B e f o r e u s e
Inserting or changing the Braun energy cell
ene rg y ce ll
G H
The energy supply must be
switched off (switch A at
position «0»).
Press the «open» release
button E and pull off the
handle.
Insert a Braun energy cell
into the handle as shown in
the illustration (arrow on
energy cell pointing
upwards). Push the handle
with the energy cell back into
the appliance until it snaps
into place.
Only use Braun maxi energy
cells. These are available
from the store where this
appliance was purchased,
as well as from authorised
Braun Service Agents.
The energy cells can be
taken out or changed at any
time, even if they are only
partly filled.
The handle is
provided with an
energy level
indicator F that
shows when the
filling level of the energy cell
is 50 % and below.
D e s c r i p t i o n D e s c r i p t i o n
start
1
0 E
B
A
D
C
F
50
%
25
98826984_C21_UK 06.10.2008 15:56 Uhr Seite 3