Blaupunkt MP34 - Manual (Page 18)

18
To play all the tracks/files on the inserted
MP3-CD in random order,
➮
press button 5 MIX
9 longer than
2 seconds.
“MIX CD” appears in the display and the
MIX symbol lights up.
Cancelling MIX
To cancel MIX,
➮
briefly press button 5 MIX
9.
“MIX OFF” appears in the display and
the MIX symbol disappears.
Scanning tracks/files (SCAN)
You can briefly play all the tracks/files
on the CD.
➮
Press the MENU button 8 for
longer than 2 seconds.
“SCAN” appears alongside the blinking
track/file numbers during the scanning
process.
Note:
● You can set the scanning time
(scantime). For further details on
setting the scantime, please read the
“Setting the scantime” section in the
“Radio mode” chapter.
Stopping SCAN and continuing
playback
➮
Briefly press the MENU button 8.
The currently scanned track/file will then
continue to be played normally.
Repeating individual track/file or
whole directories (REPEAT)
To play the current track/file repeatedly,
➮
briefly press button 4 RPT
9.
“RPT TRCK” appears briefly in the
display and RPT lights up.
To repeat the whole directory,
➮
press button 4 RPT 9 longer than
2 seconds.
“RPT DIR” appears briefly in the
display.
Cancelling REPEAT
To stop the current track or current
directory from being repeated,
➮
briefly press button 4 RPT
9.
“RPT OFF” appears briefly in the
display and the RPT symbol
disappears.
Pausing playback (PAUSE)
➮
Press button 3 E 9.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 E 9 while in
pause mode.
Playback is resumed.
Setting the display
Setting the standard display mode
While playing MP3 tracks/files, you can
choose to display one of the following
standard display modes:
● Track/file number and playing time
● Track/file number and clock time
● Directoy number and track/file
number
● Directoy number and clock time
● Directoy number and playing time
MP3 MODE
BA Bahamas/Monte Carlo MP34_EN 13/11/03, 8:59 18