Bunn G9WD-RH - Manual (Page 7)

7
GLOSSARY
GRIND OZ: ##.##
(-) DONE (+)
Adjust current weight setting
using (-) and (+) buttons
Allows adjustment of current
time setting
Adjust current time setting us-
ing (-) and (+) buttons
Allows adjustment of other
batch sizes (multiple batch size
grinders only)
Test individual inputs and out-
puts
Allow selection of grinder mo-
tor test
Turns grinder motor ON and
OFF
Allows selection of switch test
Pressing any switch will show
switch selected on screen
Allows selction of scale test
Set “offset” weght for coffee
name selected
Allows switches on control
panel to be disabled for servic-
ing grinder
CENTER SW TARE Allows present weight on scale
to be tared
Shows current weight on scale
Test read/write coils (Brew-
WISE enabled grinders only)
Resets all functions to factory
defaults
Select between weight based or
time based grinding
Allows calibration of scale
Allows scale to be tared for
calibration
Displayed while scale is being
tared
Adjust weight be added for cali-
bration
Displayed while scale is cali-
brating
Set maximum “offset” adjust-
ment for grind
Shows total amount of coffee
which has been ground through
grinder
SET GRIND TIME?
NO YES
GRIND SEC: #.#
(-) DONE (+)
3 BATCHES DONE?
NO YES
SERVICE TOOLS?
NO YES
TEST GRIND MOTOR
NO NEXT YES
GRIND MOTOR
ON DONE OFF
TEST SWITCHES?
NO YES
PRESS RIGHT
HIDDEN TO EXIT
TEST SCALES?
NO YES
CALIBRATE COFFEE
NO YES
SWITCHES
ENABLE DISABLE
OUNCES = #.##
EXIT TARE
TEST FREQUENCY?
NO YES
FACTORY DEFAILT?
NO YES
MACHINE TYPE?
WEIGHT TIMED
CALIBRATE SCALE?
NO YES
CALIBRATE SCALE
EXIT TARE
PLEASE WAIT
TARE
CALIBRATION OZ
(-) 8.00 (+)
MAX BIT SPREAD #
(-) DONE (+)
Pm Burr LBS #
RESET
PLEASE WAIT
CAL
41451.0001 060710