Bel Canto Design Balanced Control Preamplifier Pre1 - Manual (Page 8)

Specifications
Volume setting for unity gain • 84
Input overload • 5 Volts rms
Bandwidth Into >600 Ohms • 0 Hz-200 kHz
Signal to Noise Ratio re 1 volt out • >100 dB A weighted, 20-20KHz
Distortion at 1 Volts rms Out • <0.01%
Input configuration and impedance • Single-ended/balanced 20K ohm
Output Options • 2-XLR Balanced; 2-RCA; 1-buffered RCA Tape Out
Output Impedance • 50 ohms
Maximum Output Level • 10 volts rms Balanced
Gain Single-ended • 16 dB
Gain Balanced • 16 dB
Power Requirements • 100-120 VAC 50-60 Hz or 230-240 VAC 50-60 Hz 25VA
Size • 17.5”W x 15”D x 4”H (mm x mm x mm) Weight • 14lbs. (6.5kg)
Warranty Information
Please take a moment to fill out your warranty registration card.
Returning this registration validates your warranty and allows us to send you
information on product updates and new product development. Completion of
this card is requested within 15 days of purchase to ensure immediate warranty
coverage.
Bel Canto Design offers a 5-year limited warranty on internal parts and
workmanship and will replace any defective parts directly. This warranty is void
if damage is due to abuse, neglect or unauthorized modification.
Bel Canto Design products are uniquely identified with a serial number
on the back panel or the bottom plate of each unit. This number is required to
validate your warranty along with a copy of the original purchase receipt, please
reference it if service is required. If you have any questions, comments or if we
can be of service, please contact us Monday through Friday 9:00 a.m. - 5:00
p.m. central time.