Philips StyleShaver Perfilador y afeitadora resistente al agua - Manual (Page 16)

Thoroughly cleaning of the shaving head
1 Switch off the appliance.
2 Pull the shaving head off the appliance.
Note: The shaving head is fragile. Handle it carefully. Replace the shaving head
if it is damaged.
3 Rinse the shaving head with lukewarm water.
Do not clean the shaving head with the cleaning brush, as this may cause
damage.
4 Remove hairs from the cutters with the cleaning brush.
Note: Do not brush the cutters in a different direction then indicated, as this
may cause damage.
5 After cleaning, snap the shaving head back onto the appliance (‘click’).
ENGLISH
16