beautypg.com

Flip/release panel, Theft protection, Removing the flip/release panel 1 – Blaupunkt Wiesbaden CD51 User Manual

Page 6: Attaching the flip/release panel

background image

31

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

PORTUGUÊS

Flip/release panel

Theft protection

Your car radio is fitted with a flip/release
panel to guard against theft. Without this
panel, the unit is worthless to the thief.
Protect your unit from theft by taking the
flip/release panel with you every time
you leave the car. Do not leave the panel
behind in the car, even if it is out of sight.
The constructive design of the panel
makes for simple handling.

Note:

Do not drop the flip/release panel.

Do not expose the flip/release pan-
el to direct sunshine or other sourc-
es of heat.

Keep the flip/release panel in the
case provided.

Avoid direct skin contact with the
flip/release panel. Please clean it
when necessary with some white
spirit on a lint-free cloth.

Removing the flip/release panel

1

Press the

button

1

.

This unlatches the flip/release panel.

First pull the flip/release panel
straight and then to the left out of
the unit.

After removing the flip/release pan-
el, the unit switches itself off.

All the current settings are saved.

If there is a CD in the unit, it re-
mains there.

Attaching the flip/release panel

Slide the flip/release panel from left
to right into the unit guide.

Press the left side of the panel into
the unit until it slots into place.

Note:

Do not press against the display
while attaching the flip/release pan-
el.

If the car radio was switched on when
the flip/release panel was removed, it
comes on again automatically as last
set (radio, CD, CD changer or AUX)
when the panel is replaced.

FLIP/RELEASE PANEL

This manual is related to the following products: