Belkin F1DC108B-DR - Manual (Page 16)

14
Installation
Connecting the LCD Rack Console with Multiple
PRO3 KVM Switches (Daisy-Chaining)
You can daisy-chain up to 15 additional PRO3 KVM Switches (F1DA104Z,
F1DA108Z, F1DA116Z, F1DA104Q, F1DA108Q, and F1DA116Q), allowing
a server administrator to manage up to a maximum of 256 servers from one
console. Each daisy-chained PRO3 KVM Switch is referred to as a “BANK” and
is assigned an address. The LCD Rack Console is BANK 00 and is referred to as
the “primary” KVM switch. BANKs 01 through 15 are referred to as “secondary”
KVM switches.
Note: The LCD Rack Console (F1DC108B-DR, F1DC116B-DR) must be
designated as the primary KVM switch. Refer to the diagram below.
cable 1
cable 2
cable 3
Primary unit (BANK 00)
Secondary unit (BANK 01)
Secondary unit (BANK 02)
Secondary unit (BANK 03)
Note: A Daisy-Chain Cable (F1D108-CBL) is required to daisy-chain each
PRO3 KVM Switch and is available through your Belkin reseller, or online at
www.belkin.com.