Bravetti F1100H - Manual (Page 6)

OPERATING INSTRUCTIONS
• Make sure the oil level in the oil
container is between the "minimum"
and "maximum" lines. Do NOT exceed
the "MAX" line on the oil container when
filling with oil.
• The frying basket should not be
immersed in the oil during the pre-
heating.
• Replace the deep fryer cover.
• Plug the appliance into a 120-volt outlet.
The unit will beep and the ”Ready Light”
light will come on and it will be “Green”.
• Press the power button (Fig. 6) and the
unit will beep again. The upper screen
display will show 320 °F and the lower
screen will display _ _: _ _ . The “Ready
Light” will now turn “Red”.
• Temperature: The temperature is
adjustable from 155 °F to 385°F in 5ºF
increments. If you want to raise the
temperature, press the knob, make sure
the temperature
Pre-Heating
Warning:
In order to avoid injury or
burns, never touch any metal parts on
the deep fryer because they may be hot.
indicator is flashing and turn the knob
clockwise. When you press the knob,
the unit will beep. If you want to lower
the temperature, press and turn the
knob counter-clockwise. When you
press the knob, the unit will beep again.
The upper screen will display the
temperature that you set. The “Ready
Light” will remain “Red” while the oil is
heating to desired temperature. (Fig. 6)
Once the oil temperature has been
reached, the “Ready Light” will turn
“Green” again and flash.
• Timer: The MAX timer time is 15
minutes. When you turn the deep fryer
on, the display screen will show _ _:_ _.
This means that there is no time set.
You can set the timer up to a maximum
of 15 minutes. To set the timer, press
the knob, ensure that timer indicator is
flashing and turn the knob until you
reach the time desired.
• Clear function: If you press the clear
button, the unit will go to the default
status. The default temperature is
320 °F and the default time is _ _:_ _.
Clear
Button
Power
On/Off
Display
Panel
Ready
Light
Time/
Temperature
Knob
Fig. 6
5