Philips Kit de termómetros digitales para bebés - Manual (Page 5)

Soother thermometer
The most convenient way to measure your baby’s temperature is to use
the soother thermometer.This is also the most comfortable method for
baby. Don’t use for 30 minutes after the baby has had hot or cold drinks
as this causes an inaccurate measurement.
• Push the on/off button (A-1) to switch on the thermometer.
(The display (A-2) shows an ‘L’ and a flashing ‘°C’.)
• Place the soother in the baby’s mouth and leave it there until the
thermometer beeps four times.
• The display now shows the measured temperature and the °C sign
lights continuously.
• Remove the soother from the baby’s mouth.
• Push the on/off button to switch off the thermometer. (Doing this
extends battery power.The thermometer switches off automatically
after about 10 minutes.)
Checking the last measured temperature
If you wish to compare temperatures then you can check to see what
the last measured temperature was.This can only be done once before a
new measurement. Push and hold the on/off button for about 3 seconds.
The display shows the last measured temperature and an ‘M’ for
memory.When you release the button this temperature is erased.
Battery low indication
This soother thermometer has a long-life battery which should last for
about 2 to 3 years. If the display shows a
, the battery is low and
the thermometer has reached the end of its useful life. Do not use it any
more.
Before disposing of the thermometer remove the battery and dispose of
it in an environmentally friendly manner. (To gain access to the battery
unclip the small cover.)
Baby thermometer set EN
6