Sound level lights, Nightlight, Paging the parent unit – Philips AVENT Vigilabebés DECT User Manual
Page 11: Lullaby function
1
Press and hold the TALK button and talk clearly into the microphone from a distance of 15-
30cm (Fig. 24).
, The green LINK light starts flashing and the message ‘Talk’ appears on the display.
2
Release the TALK button when you have finished talking.
Sound level lights
The parent unit continuously monitors the sound level in your baby´s room and the sound level
lights let you know if there is any activity. If your baby cries, you see the sound level lights light up on
the parent unit.
- As long as the baby unit does not detect a sound, all sound level lights on the parent unit are
out.
- When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.
The number of lights that go on is related to the loudness of the sound picked up by the baby
unit.
nightlight
Note: You can also switch the nightlight on and off in the menu of the parent unit (see chapter ‘Menu
options’, section ‘Nightlight’).
1
Press the nightlight button Q on the baby unit to switch on the nightlight. (Fig. 25)
, Q appears on the display of the parent unit.
2
Press the nightlight button Q again to switch off the nightlight.
, The nightlight dims gradually before it goes out completely.
, Q disappears from the display of the parent unit.
Tip: Switch off the nightlight when you operate the baby unit on non-rechargeable batteries. This saves
power.
paging the parent unit
If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button
on the baby unit to locate the parent unit.
Note: The paging function only works when the parent unit is switched on.
1
Press the PAGE button on the baby unit (Fig. 26).
, The message ‘Paging’ and the paging symbol appear on the displays of the baby unit
and parent unit.
, The parent unit produces a paging alert tone.
2
To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.
lullaby function
Note: You can also operate the lullaby function in the menu of the parent unit (see chapter ‘Menu
options’, section ‘Lullaby function’).
1
Press the play/stop button E on the baby unit to play the currently selected
lullaby. (Fig. 27)
2
To select another lullaby, press the lullaby button K on the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 28)
Note: If you do not press the lullaby button K for more than 2 seconds, the lullaby shown on the display
starts to play.
, The number of the lullaby appears on the display together with the lullaby symbol K.
, The lullaby repeats continuously.
EngliSh
11