Philips Afeitadora 2 cab. - Manual (Page 3)

compliance with standards
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this
user manual, the appliance is safe to use based on
scientific evidence available today.
general
The appliance is equipped with an automatic voltage
selector and is suitable for mains voltages from 100
to 240 volts.
charging
Charge the appliance when the motor stops or
starts running slower.
When you charge the shaver for the first time
or after a long period of disuse, let it charge
continuously for 4 hours. Charging normally takes
approx. 1 hour.
You can also shave without charging. Simply connect
the shaver to the mains.
Do not charge the shaver in a closed pouch.
1 Put the appliance plug in the shaver.
2 Put the mains plug in the wall socket.
Note: Make sure the appliance is switched off.
The green charging light goes on to indicate that
the shaver is charging.
When the shaver is fully charged, the green
charging light starts flashing.
3 Remove the mains plug from the wall socket
and pull the appliance plug out of the shaver
when the shaver is fully charged.
,
,
CHARGE CHARGE
EnglisH 5