Belkin Powerline AV Networking Adapter F5D4074 - Manual (Page 7)

5
Configuration
Overview
The Adapter uses 128-bit AES encryption to block access from the outside. By
default, the protection is enabled. However, it is recommended that you change
the default network password with the “Encryption” button located on the units.
Changing the Network Password
1 . With both Adapters plugged into the wall, press the “Encryption” button on
both units for 10 seconds . The password on these Adapters has now been changed
to a random value .
2 . Next, press the “Encryption” button on one unit for more than 0 .5 seconds, but
less than three seconds .
3 . Within two minutes, press the “Encryption” button on the second unit for more
than 0 .5 seconds, but less than three seconds .
4 . The new network password has now been saved to the second unit . The
password will not be lost, even if the Adapters are unplugged from the wall .
Encryption
Reset