Belkin F6H550-USB - Manual (Page 2)

• AIX 4.3.3, 5.1, 5.2
• Compaq Tru64 Alpha
• FreeBSD x86
• HP-UX 11.x, 11i.x
• Linux
• Mac PPC OSX
• SCO UnixWare 7.1.1, 7.1.3, SCO Unix 8.0, and SCO OpenServer 5.0.6, 5.0.7
• SGI Irix 6.5.x
• Solaris / Sparc 2.6, 7, 8, 9 , and Solaris / Intel 2.6, 7, 8, 9
• Windows XP / 2003 / 2000 / ME / 98 / NT 4.0 (SP6).
c) Belkin Automatic Power Management Software Installation Steps.
For Windows platform
• Run setup.exe in the \Windows\Disk1\InstData\VM\ directory of your CD to
start the installation program.
• Read the information provided, then click Next.
• Review the installation options that you have selected. If the options are
correct, then click “Install” to begin the installation.
• When the installation program is completed, click Done.
For Mac OS X platform
• Run setup.app in the \MacOXS\Disk1\InstData\ directory of your CD to start the
installation program.
• Read the information provided, then click Next.
• Review the installation options that you have selected. If the options are
correct, then click “Install” to begin the installation.
• When the installation program is completed, click Done.
For Other Platforms
• This CD provides two installation modes: GUI mode and Console mode. Enter
the directory according the system and run setup.bin or setup_console.
bin to start the installation program. Note: For UnixWare, Irix and Tru64
platform, make sure JRE1.3.1 has been install in your system, then enter the
/GenericUnix directory and run setup.bin or setup_console.bin to start the
setup.
• Read the information provided, then click Next.
• Review the installation options that you have selected. If the options are
correct, then click Install to begin the installation.
• When the installation program is completed, click Done.
Reboot the system.
The install program set the Belkin Automatic Power Management Software
Running Environment Variables in /etc/profile, reboot the system to make it
valid.
H. Uninstall Belkin APM Software
Note: Before uninstall Belkin APM Software, all Belkin APM Software program must
be stopped first. Otherwise the uninstalling cannot be run completely.
Windows operating system
1. There are two ways of uninstalling Belkin APM Software:
(a) Click directly on the Uninstall Belkin Automatic Power Management Software
from the Start menu >programs> Belkin Automatic Power Management
Software.
(b) Use the Add / Remove Program under Control, and select Change or Remove
Programs from the left. Select Belkin Automatic Power Management Software,
and click the Change / remove button.
2. The Uninstall Program will pop up a prompt, and click Uninstall to start the
uninstalling.
To exit the uninstallation, click Cancel.
Mac OS X system
open the Terminal from Application > Utilities> Terminal, enter the installation
directory (/opt/upspilot by default) and ececute the command: sudo ./Uninatall
Enter the system account password when it prompts. The installation will be carried
out with administrator privilege and can completely uninstall all the files.
If you just execute the ./Uninstall command , the installation may not has the
permission to uninstall all the files.
Linux and UnixWare system
Open the Terminal, enter the /opt/upspilot in the address bar and execute
command: ./Uninstall.
Safety Information
This Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
To assure continued compliance, use only shielded interface cables when
connecting to computer or peripheral devices. Any changes or modifications
not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
Belkin Corporation User License Agreement
Belkin Corporation (“Belkin”) thanks you for choosing one of our products for
your use. This User License Agreement (“Agreement”) contains the terms and
conditions under which limited use of the product is licensed to you.
PLEASE READ THIS NOTICE CAREFULLY.
DO NOT USE THE SOFTWARE OR PRODUCT UNTIL YOU HAVE READ
AND AGREED TO THIS AGREEMENT. IF YOU USE THE SOFTWARE AND
PRODUCT, YOU ARE AGREEING TO THE TERMS AND CONDITIONS SET
OUT IN THIS AGREEMENT. IF YOU DO NOT ACCEPT THESE TERMS AND
CONDITIONS, YOU MUST RETURN THE UNOPENED PRODUCT WITH THE
DISKS INSIDE TO THE PARTY FROM WHOM YOU RECEIVED IT.
SCOPE OF USE: In this Agreement, software means all machine-readable
software programs and associated files in this package, all modified versions
of and upgrades or improvements to such programs and all copies of such
programs and files. You, a single user opening this envelope, may use the
software on a single central processing unit. You may not rent it, loan it out,
or lease it, nor use it on a multiuser system.
LICENSE: You have the non-exclusive right to use the software. You are not
permitted to copy, modify or transfer the software or documentation. You
may not compile, disassemble or otherwise reverse engineer, break down,
analyze or modify the software.
USE AND RESTRICTIONS: You are permitted to make backup copies of
all the software disks for archival purposes only. You must reproduce the
proprietary notice set forth on the disks and affix them to all backup copies.
You are not permitted to use these programs in connection with a computer
service, or to use the backup copies other than as a replacement for the
original copy.
TERM: This license is effective upon acceptance by opening this envelope
or in any other way using the enclosed software, which will constitute your
acceptance of, and agreement to, this Agreement, and is effective until
terminated. The limited license in this Agreement will be automatically
terminated if you fail to comply with any of the Terms and conditions in
this Agreement. You agree that upon such termination you will immediately
destroy all programs and documentation, including all copies made or
obtained by you.
SOFTWARE, PROGRAM, DOCUMENTATION, AND ANY RELATED
INFORMATION, GOODS OR SERVICES ARE PROVIDED WITH NO
WARRANTY OR REPRESENTATION OF ANY KIND WHATSOEVER. BELKIN
HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The entire risk of the use, results and performance of the software, program
and documentation is borne by you. Should any or all of the product,
software, program, documentation, or related information, goods or services
be defective, misused, unsuitable or cause or give rise to any harm or liability
whatsoever, you, not Belkin or its associates, dealers or agents, assume
the entire liability, cost of repair, correction or any payment or other remedy
whatsoever. Furthermore, no warranty or guarantee is made regarding the
use or results of the product, software, program, documentation, or any
related information, goods or services in terms of correctness, accuracy,
reliability, timeliness or otherwise. You use and rely on the program at your
own risk. The following is the only and exclusive warranty and remedy of
any kind: Belkin does warrant that the program disks are free from physical
defects in materials and workmanship under normal use for a period of one
(1) year from the date of purchase, as evidenced by a copy of the sales
receipt. Return the defective disk or documentation with your receipt directly
to Belkin for a replacement.
DISCLAIMER: Belkin or its associates will in no event be liable (i) in any
amount for lost profits or special, incidental, punitive or consequential
damages, or (ii) for any claim or damage of any nature, or under any theory,
whatsoever, in any amount in excess of the purchase price you paid for the
product. The warranties and remedies here set forth are exclusive, and in lieu
of all others oral or written, expressed or implied. Some jurisdictions do not
allow exclusion or limitation of implied warranties or of liability for incidental
damages, so the foregoing limitations or exclusion may not apply to you. This
warranty gives you specific legal rights, which vary from jurisdiction
to jurisdiction.
Battery Name Recycling Inside the USA Outside the USA Recycling
BB Battery (800) 278-8599 N/A
CSB Battery (800) 738-7372 1 (817) 244-4415
VISION Battery (604) 730-2877 N/A
Best Battery (888) 841-5179 N/A
HOWEVER, YOU WAIVE SUCH RIGHTS, EXCEPT AS EXPRESSLY
PROVIDED UNDER THE TERMS AND CONDITIONS HAVE THIS
AGREEMENT, TO THE MAXIMUM EXTENT ALLOWED BY LAW.
The license is governed by the laws prevailing in the State of New York,
without regard to its conflicts of laws principles.
ACKNOWLEDGMENT: By opening the package on which this Agreement
is printed, or through which it is visible, you acknowledge that you have
read this Agreement, understand it, and agree that this Agreement is the
complete and exclusive statement of agreement between yourself and
Belkin and supersedes any prior agreements, oral or written, and any other
communications relating to the subject matter of this Agreement.
SEVERABILITY: Any term or provision of this Agreement or any application
thereof, which may be prohibited or unenforceable by law in a particular
jurisdiction, shall be interpreted and enforced to the maximum extent allowed
in such jurisdiction (which the parties acknowledge could mean severing the
provision from this Agreement or, if allowed, enforcing it in a narrower form),
without affecting the remainder of this Agreement, or any other application
of such term or provision in such jurisdiction, or application of such term or
provision in any other jurisdiction.
Safety Information
Caution
l Internal battery voltage is 12V DC.
l The Unit is intended for installation in a controlled environment
(temperature controlled, indoor area free of conductive contaminants).
l All batteries used are sealed lead batteries. Batteries must be recycled.
Recycling
Your Unit contains a non-spillable sealed lead battery. On the battery, you
will find the battery name. Please reference the chart below for recycling
information.
Troubleshooting
Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
Belkin Corporation
501 West Walnut Street
Compton, CA 90220-5221, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
© 2005 Belkin Corporation.
All rights reserved. All trade names are
registered trademarks of respective
manufacturers listed.
614-07417-00
Contact Belkin
Battery Backup with Surge Protection User Manual
F6H375-USB, F6H550-USB
PROBLEM POSSIBLE CAUSE SOLUTION
Power LED “On/Off” button not pushed Press the “On/Off” button
is not lit or pushed less than button more than 2 seconds
2 seconds
Unit will not Battery voltage is too low Recharge the Unit
power on for at least 8 hours
UPS fault Contact Belkin Technical
Support at [email protected]
Unit always on Power cord loose Re-plug the power cord
battery mode
AC breaker is tripped Reset the breaker
Power disturbances Normal operations
have occurred
Backup time Battery is not fully charged Recharge the Unit for a
is very short minimum of 8 hours
Unit is overloaded Remove unnecessary power
loads (devices)
UPS fault Contact Belkin Technical
Support at [email protected]