Briggs & Stratton 91200 - Manual (Page 10)

10
STARTING AND STOPPING
REWIND (MANUAL) STARTER
TO START ENGINE
[1] Check oil level (see p. 8).
[2] Move throttle (if equipped) to FAST. Operate engine with throttle in FAST.
[3] Move choke control lever to CHOKE.
OIL LEVEL
Throttle
Choke
Throttle
[4] Move stop switch (if
equipped) to ON.
[5] Grasp rope handle. Pull
slowly until resistance is
felt, then pull rapidly to
start engine and avoid
kickback.
[6] Let engine warm up.
Choke Equipped: Move
choke control lever
toward RUN a short dis-
tance at a time over sev-
eral seconds in warm
weather or minutes in cold
weather. Let engine run
smoothly before each
change. Operate with
choke in RUN.
WARNING
OFF
ON
Stop Switch
TO STOP ENGINE
CAUTION: Do not stop engine by moving choke
control to CHOKE. Backfire, fire or engine damage
could occur.
[1] Move throttle control to SLOW, then to STOP (if equipped).
[2] Push stop switch (if
equipped) to OFF.
Throttle
Throttle
Stop Switch
OFF
ON