Philips SHAVER Series 7000 SensoTouch afeitadora eléctrica en húmedo y seco - Manual (Page 19)

5 Place the Jet Clean System back onto the cleaning chamber.
Make sure the release buttons click back into place.
Extra-thorough cleaning method
Make sure the appliance is switched off.
1 Pull the shaving head holder off the bottom part of the shaving unit.
2 Slide the green retaining frame in the direction of the arrows
indicated on the retaining frame.
3 Lift the retaining frame out of the shaving head holder.
4 Remove the cutter from the shaving guard.
Note: Do not clean more than one cutter and shaving guard at a time, since
they are all matching sets. If you accidentally put a cutter in the wrong shaving
guard, it may take several weeks before optimal shaving performance is
restored.
ENGLISH 19