B&K p/n 12698 - Manual (Page 41)

ADVANCED FEATURES
WARNING -
The following describes the advanced features of the A/V System Controller. Since
changing some of these functions may cause severe effects such as no sound or no remote control operation, we
suggest you leave this menu disabled (hidden) for normal operation. If you are unsure of what you are changing
DO NOT perform any advanced operations. These features may be activated by simultaneously pressing the
SLEEP, DOWN, and UP buttons on the front panel of the A/V System Controller.
ADVANCED SECURITY OPTIONS
Advanced Security options allow you to hide the ADVANCED SYSTEM SETUP menu to prevent inadvertent
changes to advanced system settings. This menu also allows you to lock your preset and tuner channel settings to
prevent inadvertent reprogramming
Advanced Menu Visibility - If you select Advanced Menu Visible then you can return to this menu directly by
entering MAIN MENU and selecting Setup / Configure (refer to SETUP). Advanced Systems Settings will appear
as line 6 in SETUP MENUS. Make sure your A/V System Controller is on and the remote is in AUDIO mode.
Advanced Security Options
1 Advanced Menu Visible
2 Memory Lock No
$'9$1&(' 9,6,%/(
move to new line
previous page
↑ ↓
M E N U
adjust parameter
←→
set to Hidden (recommended) or Visible VOLUME KNOB ˆ
(REW) or
‡
(FF) 3
move to Advanced Menu ∧
(UP) or
∨
(DOWN) ­ (PAUSE) or V (STOP) 2
enable advanced features ) SLEEP,
∧
(UP) and
∨
(DOWN)
simultaneously
Function not available
from remote 1
Action From Front Panel From Remote
Memory Lock - Locking memory will prevent changing of your presets, tuner channels, and system setup.
Advanced Security Options
1 Advanced Menu Visible
2 Memory Lock No
0(025< /2&. 12
move to new line
previous page
↑ ↓
M E N U
adjust parameter ←→
ADVANCED SYSTEM SETUP
1 Zone Configuration
2 Power On Titles
=21( 6(783
move to new line
previous page
↑ ↓
M E N U
select menu page SEL
3 Control Out
4 Security Options
move up to ADVANCED SYSTEM SETUP MENU MENU 3
No - can change memory
Yes - memory is locked VOLUME KNOB
ˆ
(REW) or
‡
(FF) 2
move to Memory Lock ∧
(UP) or
∨
(DOWN)
­
(PAUSE) or
V
(STOP) 1
Action From Front Panel From Remote
39
p/n 12698 Rev. 9808B