Brinkmann Heavy Duty 2415 - Manual (Page 28)

27
Step 11
Attach side table to left side of cart
frame assembly. Place keyholes over
pre-attached bolts and slide toward
back of grill, then tighten securely.
Fasten side table front panel to grill
body with one M6 X 12 mm bolt.
Step 12
Attach side burner assembly to
right side of cart frame assembly.
Place keyholes over pre-attached
bolts and slide toward back of grill,
then tighten securely. Fasten side
burner assembly front panel to grill
body with one M6 X 12 mm bolt.
Step 13
Press the two raised points on the
back of the bezel into the
corresponding holes on the side
burner front panel.
Burner Venturi
Assembly Bracket
Side Table Holes