Philips StyleShaver Perfilador y afeitadora resistente al agua - Manual (Page 14)

2 Pull the shaving head off the appliance.
Note: The shaving head is very delicate. Handle it carefully. Replace the shaving
head if it is damaged.
3 Rinse the shaving head with lukewarm water.
Do not clean the shaving head with the cleaning brush, as this may cause
damage.
4 Remove hairs from the cutters with the cleaning brush.
5 After cleaning, snap the shaving head back onto the appliance (‘click’).
replacement
In case of frequent use, replace the shaving foil and the cutters every year.
Shaving foil
1 Pull the shaving head off the appliance.
2 Remove the old shaving foil from the shaving head.
3 Snap the new shaving foil into the shaving head (‘click’).
EngliSh
14