Philips Flat TV - Manual (Page 67)

7
Picture settings
& Press H
then
¬
.The Picture menu is
displayed:
é Use the îÏ
keys to select a setting and
the
Ȭ
keys to adjust.
“ Once the adjustments have been made, select
Store and press
¬
to store them. Press
d
to exit.
Description of the adjustments:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the colour.
• Contrast: this changes the difference
between the light and dark tones.
• Sharpness: this changes the picture definition.
• Colour Temp.: this changes the colour
rendering: Cold (bluer), Normal (balanced)
or Warm (redder).
• Store: to store the picture adjustments and
settings.
TV Menu
Picture
Sound
Features
Install
Mode
Picture
Brightness
Colour
Contrast
Sharpness
Colour Temp.
Store
39
Manual store
Other settings in the Install menu
This menu is used to store the programmes
one at a time.
& Press the H
key.
é With the cursor, select the Install menu then
Manual store:
“ System: select Europe (automatic detection*)
or Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom (I
standard) or France (LL’ standard).
* Except for France (LL’ standard), you must select
choice France.
‘ Search: press ¬
.The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
directly using the
0
to
9
keys.
If no picture is found, consult the possible solutions (p. 12).
( Program No.: enter the required number
with the
Ȭ
or
0
to
9
keys.
§ Fine Tune: if the reception is not satisfactory,
adjust using the
Ȭ
keys.
è Store: press ¬
.The program is stored.
! Repeat steps ‘ to ! for each programme to
store.
ç To quit the menus, press d
.
& Press the H
key and select the Install menu:
é Language: to change the display language for
the menus.
“ Country: to select your country (GB for
Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 6).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
In this case, indicate your choice using the
îÏ
keys and validate with
¬
.To quit or interrupt the
search, press
H
. If no picture is found, consult the
possible solutions (p. 12).
( To quit the menus, press d
.
TV Menu
Picture
Sound
Features
Install
Mode
Manual Store
System
Search
Program No.
Fine Tune
Store
Europe