Blaupunkt FRANKFURT RCM 104 User Manual

Page 20

Frankfurt RCM 104

TIME

The current time will be dis-
played, or it has to be adju-
sted.
Use the rocker button << >>
to select the hours or minu-
tes (flashing), and the /
switch to set the time. Start
with -dB. The precise time
setting is required for the
proper operation of TIM.

CDC NAME (only if changer is connec-

ted)
Use this function to name
your discs (see also CD
changer control, “Entering/
displaying CD names“)

ANGLE

Use one of the values -1, 0,
or +1 to adapt the individual
viewing angle.
Adjust the ANGLE so as to
provide the best view.

BAS F=R

To distribute the bass level
among the front and rear
speakers between +6 dB
front and +6 dB rear.

TRE F=R

To distribute the treble level
among the front and rear
speakers between +6 dB
front and +6 dB rear.

BEEP

This sound will confirm
functions which are comple-
ted by pressing a button for
longer than 2 seconds.
Adjust volume between 0
and 9 (0 = OFF).

BRIGHT

You can adjust the display
brightness from values bet-
ween 1 and 16. You can also
select one day and one night
adjustment.
Selecting the night bright-
ness:
Switch on the vehicle’s light-
ing system and program the
brightness value. The audio
equipment must be connec-
ted with the vehicle lighting
for this to function properly.

COLOUR

G .................................... R
green

red

CDC DISP

(only if changer is connec-
ted)
During CD operation, use
<<>> to select between the
following displays:

NAME -
the CD name specified with
CDC NAME

TIME -
the playback time

NUMBER -
the CD or track number

LED ON

You can select between LED
ON and LED OFF. When
setting LED ON, the Key-
Card tongue will flash for
additional optical theft pro-
tection when the set has
been switched off and the
KeyCard removed.

LOUDNESS When listening at a low level,

the loudness function will
create a more natural sound
by emphasizing the low fre-
quency range.
LOUD 1 - low boost
LOUD 6 - strong boost