Philips MULTIGROOM Series 3000 Set de cara de arreglo personal resistente al agua - Manual (Page 7)

Beard trimming with beard comb
1 Place the trimmer onto the handle (1).
Turn the trimmer clockwise to fix it (2).
2 Slide the beard comb into the guiding grooves
on both sides of the handle.
3 Press the setting selector (1) and slide the
comb to the desired hair length setting (2).
You can choose any setting between 1 and 18mm.
4 Switch on the appliance.
5 Slowly move the trimmer against the hair
growth direction. Press lightly and always make
sure the surface of the comb is in full contact
with the skin.
Note: When you trim for the first time, start at the
highest setting (18mm) to familiarise yourself with
the appliance.
EnGlish 7