Blaupunkt CASABLANCA RCM 85 User Manual
Page 15
31
Casablanca RCM 85
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Notice:
If there is too much tension on the tape during
playback, the set may switch over by itself
before having reached the end of the tape
side. In this case check the condition of the
cassette tape. Sometimes it helps to rewind
it completely.
Dolby B-NR* and
tape equalisation with B/MTL
Dolby B-NR*
With this unit you can play back tapes recor-
ded with Dolby-B or without noise reduction.
Cassette tapes recorded with Dolby NR*
stand out by their much lower tape hiss and
the improved dynamics.
If Dolby B-NR is switched on, “B” will light up
in the display.
* Noise Reduction system manufactured under license
from Dolby Laboratories Licensing Corporation. “Dol-
by” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
MTL
Switch on the MTL function to select the best
equalisation response when using metal or
CrO
2
tapes. “MTL” will light up in the display.
To switch Dolby B-NR and MTL on/off:
•
Press B/MTL repeatedly until the desi-
red setting appears in the display.
The system enables the following settings:
MTL tape
The display shows
with Dolby B-NR
MTL
B
without Dolby B-NR
MTL
–
Normal tape
with Dolby B-NR
–
B
without Dolby B-NR
–
–
Skipping/repeating titles
with CPS
CPS stands for Cassette Program Search.
This function allows you to skip a cassette
title or listen to it once again.
To switch the function on/off:
•
Press CPS.
“CPS ON” or “CPS OFF” will light up in the
display for approximately 2 seconds.
With “CPS ON”:
Fully depress the FF button -
The tape is fast forwarded to the next title.
Fully depress the FR button -
The tape is rewound to the beginning of the
current title, provided that it has already been
played for more than 8 seconds. Otherwise the
tape will be rewound to the beginning of the
previous title.
Switching the audio source
with SRC (Source)
Using this function you can switch between
radio, tape and CD changer (optional) opera-
tion or playback of any other connected de-
vice.
To switch over:
•
Press the SRC button.