Blaupunkt KLN RCM RCM 126 - Manual (Page 8)

37
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Changer operation (optional)
To switch the display mode and select
between name, time (playback time)
and number (disc number):
•
Press DIS briefly.
A RM (Radio Monitor)
Press this button to listen to the radio
while fast forwarding or rewinding the
tape.
To switch RM on/off: Press RM.
When this function has been activated,
“RM” shows on the display panel.
The radio is played back during fast
tape run.
B
Press to eject the tape.
C 1, 2, 3, 4, 5, 6 - preset buttons
On FM, you can store six stations for
each of the memory banks I, II and T.
On MW/LW, you can store six stations
each.
To store a station: Press a preset
button during radio operation and hold
down until the set resumes play after
the muting and you hear a beep.
To recall a station: Select the desired
waveband. On FM, also adjust the
corresponding memory bank. Then
press the relevant preset button briefly.
Extra function preset buttons
To store and recall a PTY programme
type.
On FM, you can store and recall one
programme type on/from each preset
button when PTY is active (“PTY”
lights up in the display).
D Cassette loading slot
Insert the tape with side A or 1 facing
up, the open side showing to the right.
E Tape side selector
Press this button to switch over to the
other side during tape operation. The
display shows “TR 1” or “TR 2”.
F B•C – Dolby B•C NR
This set allows you to play back tapes
that have been recorded with Dolby-B
NR, Dolby-C NR or without Dolby
noise reduction.
Press B•C to adjust to the type of Dol-
by NR in which the tape was recorded
or to disengage Dolby NR. When Dol-
by is active, the corresponding indica-
tor “B” or “C” will light up.
> PTY (Programme Type)
In the PTY mode, the preset buttons
become programme type buttons. With
each preset you can select one pro-
gramme type, such as for example
NEWS, SPORT, POP MUSIC, EDU-
CATE, etc.
? SRC (source)
You can switch between the different
audio sources radio, tape, and CDC/
AUX (if activated).
@ DIS
Radio operation
When pressing the DIS button, the fre-
quency will be displayed for approxi-
mately four seconds.
Extra function DIS:
Radiotext with the ignition switched off.
Press ON to turn the radio on, press
DIS for approximately 1 second.
Tape operation
When pressing the DIS button, the sta-
tion name/frequency will be displayed
for approximately four seconds.
Köln RCM126 gb 13.06.2002, 11:18 Uhr 37