Billion Electric Company USB ISDN TA BIPAC-221 - Manual (Page 3)

Billion BIPAC-221
2
Installing the BIPAC-221
POWER
USB
ISDN S.
1. Connect the external power adapter to the power jack. All
the LEDs light and then go off one by one, except that the
PWR LED will still light.
2. Connect your ISDN line to the ISDN S
0
RJ-45 jack.
3. Connect your analog telephone and/or G3 fax machine to
the phone ports.
4. Connect a headset to the “MIC/SPK” jacks.
5. Connect the USB cable to the USB port and connect the
other end to the PC.
For Windows 98:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. You will
then see the following screen. Click “Next >”.
Power jack USB port Phone ports
ISDN S
0
RJ-45 jack