Philips SHAVER Series 7000 SensoTouch afeitadora eléctrica en húmedo y seco - Manual (Page 10)

10
Charging in the charger
1 Insert the small plug into the charger.
2 Unfold the charger (‘click’).
3 Put the adapter in the wall socket.
4 Put the shaver in the charger (1) and press it backwards until it locks
into place (2).
, The display shows that the shaver is charging (see section ‘Charging’
in chapter ‘The display’).
Charging in the Jet Clean System (RQ1197CC, RQ1195CC,
RQ1185CC, RQ11801CC, RQ1175CC only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
Note: RQ1197, RQ1195, RQ1180, RQ1175: when you turn the shaver upside
down, the battery indication on the display is also turned upside down so you
can still see to what level the battery is charged.
4 Place the shaver body in the holder behind the two clips (1) and
press it down until it locks into place (2).
Note: The shaver cannot be placed in the Jet Clean System when the protection
cap is on the shaving unit or when the trimmer is placed on the shaver.
, The display shows that the shaver is charging (see chapter ‘The
display’).
ENGLISH 10