Beko DRVS 73 S - Manual (Page 17)

17 - EN
Auxiliary function
Cancel Audio Warning
Your machine will send out an audio
warning when the programme comes to
an end. If you do not want to hear this
sound, you need to press the “Cancel
Audio Warning” button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the programme comes to an end.
C
You can select this function either
before or after the programme starts.
Warning indicators
C
Warning indicators may differ
according to the model of your
machine.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning LED
lights up continuously, please refer to,
“Solution suggestions for problems”.
Water tank (Products equipped with a
condenser)
A warning LED will light up at the end of
the programme or when the tank is full
with water. The machine stops operating
when this warning LED lights up during
a programme running. To restart the
machine, please drain the water in
the water tank. Press “Start/Pause/
Cancel” button to start the programme
after you have emptied the water tank.
The warning LED goes off and the
programme resumes operating.
Time delay
If you wish to dry your clothes at a later
time, thanks to the time delay function,
you can delay the program start up to 3
hours, 6 hours or 9 hours.
1. Open the loading door and put the
laundry in.
C
Make sure that all air outlets are open,
door filter is cleaned and the water
tank is empty.
2. Set the drying program, temperature,
spin speed and, if required, the
auxiliary functions.
3. When the time programming button
is pressed once, a 3 hour delay is
selected and the relevant led lights.
When the same button is pressed
again, 6 hours; and if pressed once
more, 9 hours delay will be selected.
If the time programming button is
pressed one more time, time delaying
function will be cancelled. Set the time
delay as you require.
4. Delayed operation of the selected
program is started by pressing the
"Start/Pause/Cancel" button after
selecting the time delay.
C
Additional laundry may be loaded /
taken out during the time delay period.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press “Start/Pause/Cancel” button
for about 4 seconds. The “:” in the
middle of the screen will stop flashing.
“Start/Pause/Cancel” light will go off
and the remaining time on the screen
disappears.
2. Press “Start/Pause/Cancel” button to
start the program right away.
Starting the Programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. “Start/Pause/Cancel” button will light
up to indicate that the programme has
started.
Progress of programme
Progress of a running programme is
shown through the programme follow-up
indicator.
At the beginning of every programme
step, the relevant indicator LED will light
up and light of the completed step will
turn off.