BT 320 - Manual (Page 3)

Installing
your
Converse 320
Situating your
Converse 320
Situate your Converse 320
close enough to a phone
socket so that the cables
will reach.
Do not stand it on carpets
or other similar surfaces
that generate fibres.
Your Converse 320 can be
wall-mounted. See ‘Wall-
mounting’.
Warning
Your Converse 320 is only
designed to be operated in a
normal office or domestic
environment. It should not
be used in bathrooms or
near water.
Check your
telephone wall socket
If you do not have a
modern-style socket, call
Free
fone 0800 800 150.
Install the batteries
The display on your
Converse 320 is powered by
3 x AAA alkaline batteries
(available separately).
Make sure the phone is
not plugged in to the
phone socket. Open the
battery compartment
cover.
Insert batteries as shown.
Close the lid and replace
the compartment cover.
Plug your Converse 320
into the phone socket
Check the
dialling mode
Set the dialling mode
switch on the underside of
your Converse 320.
It should be set to TB.
This gives you Tone
dialling and ensures the
phone will work with all
modern digital exchanges.
If your phone does not
work, try setting the
dialling mode to P.
If you are connecting to a
switchboard, check with
your switchboard operator
or communications
manager which dialling
mode you need.
Set the time
Press the Store button.
Press the Clock button.
Enter the current time
using the 24-hour clock,
eg. 0 9 3 0 = 9.30am,
1 5 3 0 = 3.30pm.
Press the Store button.
The time is set and
displayed.
Your Converse 320
is now ready for
making and
receiving calls.
P
T
TB
MODE
1
2
3
1
1
2
3
4