Philips Satinelle Depiladora - Manual (Page 16)

Problem Cause Solution
You did not
freeze the
ice gel pad long
enough.
Put the ice gel pad without the
cooling glove in the freezer or
freezing compartment (***) for at
least 2 hours.
It is not
possible to
remove the
epilating
head.
You
did not press
the release
button.
Press the release button and pull the
epilating head off the appliance (Fig.
14).
The shaving
head
(HP6483
only) cannot
be removed.
You did not
press the
release button.
Press the release button and pull the
shaving head off the appliance (Fig.
14).
Reduced
shaving
performance
(HP6483
only).
The shaving
head is dirty.
Switch off the appliance and unplug
it. Remove the shaving head and pull
the cutter unit out of the shaving
head. Clean the shaving head and
the cutter unit with the cleaning
brush or under the tap. Remove any
hairs that may have got stuck under
the trimmers.
Stronger skin
irritation
than usual
after shaving
(HP6483
only).
The cutter unit
of the
shaving unit is
damaged or
worn.
Replace the cutter unit.
EnglisH 16